RUN-MC-type optical transceiver intelligent network management network management rack system has a strong network management skills. Use this network management system to query the current work of the module and display module type, connection status and other important information. The network management system can also be turned on or off for each port, enabling the module available from the ring test and the ability to configure system parameters, such as the system's IP address. System supports up to 16 modules, management module can be combined with RJ-45 interface or optical interface for management, all modules hot-swappable, the system has standby power. Network Management System Module

Features:

◆ Each transceiver power port can be set by the network 10M, 100M, full duplex, half duplex;

◆ Each optical interface is 100Mbps, full duplex mode;

◆ remote network management through the open / close optical interfaces and electrical interfaces;

◆ Each port has a bandwidth control functions, from the N * 64Kbps to 100Mbps (N = 1 ~ 1600), can be rented as a telecommunications line use;

◆ provides send / receive data packets state statistics, accounting for the press to provide the required flow data;

◆ Auto power port MDI / MDIX crossover;

◆ the system supports a maximum frame size: 1912Byte;

◆ Provide LLD (automatically search for broken links) functions;

◆ Provide LLR (found the link off the alarm after the return information) function;

◆ Support LLCF (links off alarm information back to the central office transceiver) function;

◆ management interface provides information on: - Connection Status - Optical module type (single-mode, multimode or single fiber transceivers) - optical port is disconnected alarm (via SNMP) - Change Log - Power status - the speed status - duplex mode Status - built-in PING Diagnostic - Remote error detection - a system reboot the remote management software over the Internet or local console port for upgrades;

◆ network supports port tagging;

◆ error alarm with remote, the remote transceiver will automatically disconnect the alarm to the central office transceiver and recorded in the log file;

◆ have the system automatically refresh, setting the refresh time automatically to prevent the crash of the phenomenon;